In addition to these paint systems, TAMBOUR offers exclusive paints for specific purposes (zinc rich primer for galvanization and more)
Road marking paints are used to mark asphalt roads, curb stones, traffic isles and parking lots. Tambour road marking paints conform with the Israeli standard and comply with the requirements of the European standart BS-EN 1871 (2000) "Road Marking Materials – Physical Properties".
Fast drying paints for marking curb stones and sidewalks, offered in specific colors, designed for asphalt and concrete.
Yellow, lead and toxic metals free paint for marking roads, conforms to the new Israeli standards and to specifications of the public works department.
Acrylic paint, thinned with a solvent. Provides a unique bright white color and high resistance to abrasion.
Fast drying, good visibility.
Electronic polyurethane paints
Two component polyurethane paints especially adapted to the hi-tech industries and to application on advanced medical equipment. May be applied on metal, non-metal and plastic. Silk smooth or rough finish.
Superior two components, acrylic polyurethane paint, designed and adapted especially for application on advanced medical equipment. Good resistance to various disinfectants and detergents as well as UV. Good adhesion to ABS and PVC plastics, without any primers. Finish: silk gloss in smooth or rough surface.
Two component polyurethane paint, developed and adapted especially for application on electronic ewuipemnt packaging. Available in various RAL colors, or at customer's request by special order: the off the shelf range of colors includes: black, white, RAL 9002, 7032,7035 and more.
Finish: silk gloss in smooth or rough surface. Excellent adhesion to aluminum, in direct application without an primer. Mayalso be applied directly on ABS and PVC plastics. Quick drying (40 minutes)
Paint for stoving
Stove dried paints designed for application on metal accessories. Some paints are intended for electrostatic spraying. Typically applied to barrels, installation accessories, taps and even industrial furniture parts.
The heat is required to enable or accelerate the chemical reaction between the components, which provides a higher resistance of coating.
Alkyd stoving topcoat
Epoxy topcoat for application on machines, instruments and metallic laboratory furniture.
Paints and varnishes for industrial application on furniture and wood products, in various quality and finish levels. This line includes polyurethane and acrylic based quality coating, one component, two component paints, including acid-hardened coatings.
Two component, transparent, quick drying, highly elastic polyurethane top coat varnish. The use of compatible hardening agent enhances resistance to yellowing and provides superior hardness. Available in a range of colors. For interior use only.
Two component, quick drying, transparent, glossy or silk gloss varnishes, based on polyurethane – acrylic resins. Provide good resistance to chemicals, water and cleaning agents. Highly elastic. These varnishes retain the natural hue and gloss of the wood. Designed for application on parquet floors and expensive furniture. for interior use only.
A range of staining solutions of superior quality, user friendly, lead free. Designed for application on any type of wood, including plywood. This line includes water diluted staining solution (W), thinner diluted solutions (S), or water and thinner diluted solutions (W/S).
One and two component products, produces according to military and international standards.
Resigned for application on land, air and sea combat machines and armament, including tanks, ships and fighter plants. Superior resistance above and below the water line and climatic conditions at high altitudes.
Specialized in developing, producing and marketing polymers and adhesives for the industry and for construction.
A wide range of ready to use adhesives, for the paper, packaging and carpentry industries are produced at the plant, including self adhering adhesives and glues for wood, carpets and decorations. In addition, the plant produces emulations for the paint industry.
The R&D department constantly develops customized solutions for customers, as part of the comprehensive service provided by the plant of its customers.
The adhesives are combined of three main bases
P.V.A (polyvinyl acetate) based adhesives. Liquid plastic adhesives used to adhere Formica to plywood, wood to wood, as well as paper, leather, etc.
Solvents based adhesives
(contact adhesives)
Used to adhere formica to wood, carpets and P.V.C to wood or concrete, though application or spraying.
Acrylic based adhesives
Used to adhere P.V.C and linoleum to wood concrete.